|
AKG C214-ST Stereo Matched Pair of C214 Condenser Mics
Realistic stereo recordings require microphones with outstanding performance and excellent quality. It also requires performance consistency and accurate localization from the pair of microphones. Therefore, every factory-matched pair of C 214’s is created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method and the result is the highest possible correlation over the whole frequency range and virtually identical sensitivity for stunning, three-dimensional recordings.
The new C 214 captures sound combining one side of the legendary C 414 dual-capsule system which results in an cardioid-only design with an outstanding performance close to the famous C 414. The Ultra-Low Noise electronics are capable of handling up to 156 dB SPL but also enable for voice and orchestral instruments as well thanks to a low noise floor. Besides, the C 214 will also work on low phantom power voltages from 12 up to 48 volts. Additional features include an integrated suspension, a 20 dB attenuation pad and a low cut filter. The C 214 stereo set comes complete with two spider-type shock mounts, two stand adaptors, two windsocks, a stereo pair certificate and a rugged metal carrying case.
$ 999.00
(save 29% off RRP)
(shipping $15.50)
|
Buy Now!
|
|
Specifications Features- Absolutely perfectly matched stereo pair thanks to AKG's sophisticated computer-aided matching method
- A factory-matched pair of large diaphragm microphones for stunning, three-dimensional recordings
- Highest possible correlation over the whole frequency range and virtually identical sensitivity
- Created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method
- The cardioid-only version of the original C 414's capsule delivers AKG’s Legendary Large Diaphragm Sound
- Roadworthy Design, All-metal Die-cast body with shock- and scratch-resistant Finish
- Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise)
- Switchable 20 dB Attenuation Pad and Low Cut Switch
- Comes complete with Spider-type Shock Mounts, Stand adapters, and Windscreens, a stereo pair certificate and Metal Carrying Case
- Designed, Engineered and Built in Vienna, Austria
Technical Data
- Polar pattern: Cardioid
- Frequency range: 20 to 20,000 Hz
- Sensitivity: 20 mV/Pa (-34 dBV)
- Max. SPL: 136/156 dB SPL (0/-20 dB) (for 0.5% THD)
- Equivalent noise level: 13 dB-A to IEC 60268-4 (A-weighted)
- Signal/noise ratio (A-weighted): 81 dB
- Preattenuation pad: 0/-20 dB (switchable)
- Bass cut filter slope: 160 Hz, 6 dB/Octave, switchable
- Impedance: <=200 ohms
- Recommended load impedance: >=1000 ohms
- Supply voltage: 12 to 52 V Phantom power to IEC 61938
- Powering: < 2 mA
- Dynamic range: 123/143 dB (0/-20 dB) (A-weighted)
- Connector: IEC standard 3-pin XLR
- Finish: matte grayish blue
|
|
