ART Phantom I Direct Box
Direct boxes are the sound engineers’ Swiss Army knife! Here are some examples:
Problem: You need to connect an amplifier’s speaker output to the mic input on a mixer.
Solution: Connect a Phantom I between the speaker output and a mic input with phantom power on the mixer, then set the attenuation switch to –40dB.
Problem: Your PA is humming because there is a ground loop between a signal source and the mixer.
Solution: Connect a Phantom I between the signal source and a mic input with phantom power and set the ground switch to Lift.
Problem: You need to connect an unbalanced line-level source (ie: a synthesizer, another mixer, an effects device, etc.) to a mic input on the mixer.
Solution: Connect a Phantom I between the source and a mic input with phantom power and set the Attenuator switch to –20dB.
| $ 79.95
$ 69.95
(shipping $15.00)
|
Buy Now!
|
|
Specifications
- Signal To Noise Ratio: 100dB
- Input Level: –10 to +40dB
- Output Level: –10 to +2dB
- Input Connectors: Dual 1/4 in, unbal. inputs are parallel
- Output Connectors: XLR Balanced
- Frequency Response: 1Hz – 50kHz
- Ground Lift: Switch
- Input Attenuation: Switchable signal padding: –20dB
- Phantom Powe:r LED Indication when present
- Power: 9 to 48V DC of phantom power
- Dimensions: 3.75x2.875x1.5 inches (95mm x 74mm x 40mm)
- Weight: 0.7lbs. (317g)
|
| 
