|
ART Tube MP Project Series
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input.
This hybrid design is the latest in a long line of ART tube preamps. We took our legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product. From the new all-aluminum stackable chassis to the precision LED level metering circuitry, we have improved virtually every aspect of our already successful Tube MP series. With up to 70dB of clean musical gain and high output signal drive capability the cold digital world will melt with your mixes! Charge up your creativity with the Tube MP Project Series!
FEATURES:
Extremely Low Noise Discrete Front End
High Output Signal Drive Capability Fast FET Limiter to Prevent Overload
Switch Selectable Input ImpedanceBuilt-in Low Noise
Phantom Power SupplyXLR and 1/4”
Inputs and Outputs
| $ 169.00
$ 149.00
(shipping $15.00)
|
Buy Now!
|
|
Specifications - Frequency Response: 10Hz – 40KHz, +/-1 dB (typical)
- Dynamic Range: >100dB
(20Hz to 20KHz)
- THD: <0.05% (typical)
- CMRR: >60dB (typical)
- EIN: <-130dB
(XLR to XLR A-weighted)
- Maximum Input Level: +17dBu (1/4”), +16dBu (XLR)
- Maximum
Output Level: +20dBu (1/4”), +26dBu (XLR)
- Input Connections: 1/4” TRS unbalanced
(1meg Ohm)
- XLR female balanced
- Output Connection: 1/4” TRS unbalanced (600
Ohm)
- XLR male balanced, (<300 Ohm)
- Maximum Gain: 70dB (XLR - XLR), +50dB (1/4”-
XLR)
- Input Gain Pad: Switchable, 20dB
- XLR Input Impedance: Switchable, 4.7k
Ohms / 600 Ohms
- Low Cut Filter: Switchable, -3dB @ 40Hz
- Output Phase: Switchable,
Normal/Invert
- Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dB
limit range
- Phantom Power: Switchable, +48V DC, filtered, current limited
-
Signal Metering: Precise LED array with a fast attack and moderate release
- Tube
Type: 12AX7A hand selected
- Chassis Type: Aluminum Anodized with integral/stackable
rubber sides
- Power Requirements: 10Volts AC @ 700mA (typical)
- Dimensions:
1.75”H x 5.9”W x 6.5”D (44.5mm x 150mm x 165mm)
- Weight: 2.5 lbs. (1.14 kg)
|
|
