|
Audix ADX20i-P Miniature Condenser Mic for Brass & Woodwinds
The ADX-20i is a pre-polarized condenser microphone
designed to handle a wide variety of clip-on applications.
The ADX20i is sonically superior as well as aesthetically
pleasing and is ideally suited for saxophone, trombone,
trumpet and other brass instruments.
With a smooth uniform response over a frequency range of
40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound
not typical of microphones this size. It is machined from
solid brass and has a low reflective black e-coat finish.
The ADX-20i operates on phantom power (9-52 volts) with
the preamp module provided (APS-910). It may be used in
battery mode with optional phantom power adapter
(APS-911). The ADX-20i can be utilized with a wireless
system. Depending on the brand of wireless and the
connector configuration of the instrument body pack, the
ADX-20i connector would need to be modified accordingly.
Low noise electronic circuitry, and balanced low impedance-output
allow for interference free performance even with
long cable runs.
$ 200.00
(save 20% off RRP)
(shipping $17.50)
|
Buy Now!
|
|
Specifications
- Transducer Type Condenser (pre-polarized)
- Frequency Response 40 Hz - 20kHz
- Polar Pattern Cardioid
- Output Impedance 250 Ohms balanced
- Open Circuit Sensitivity 5.2 mV
- Equivalent Noise Level 24 dB (A weighted)
- Signal to Noise Ratio 65 dB (ref 1k @ 1 Pascal)
- Power Requirements 9 - 52v phantom
- Maximum SPL 130 dB
- Cable/Connector Shielded 6’ cable terminating to a miniature 3 pin XLR-f
- Phantom Adapter mini XLR male - XLR male
- Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
- Housing Machined Brass
- Gooseneck Flexible steel
- Weight 1.7 oz/4.7 grams (without cable)
|
|
