|
Audix SCX25-A Cardioid Studio Condenser Microphone
The SCX25-A is a true condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock mounted within an intricate machined brass ring, the SCX25-A capsule is completely isolated from the mic body and the electronics. By successfully minimizing acoustic reflections and diffractions, SCX25-A delivers a pure, open-air sound
unlike any other microphone.
Delivering a smooth uniform frequency response from 20Hz – 20kHz, the SCX25-A will reproduce vocals and acoustic instruments with exceptional detail and realism.
The SCX25-A is very consistent when responding to incoming off-axis signals, exhibiting excellent phase coherence and minimal proximity effect.
By employing miniaturized low noise components, the preamp circuitry for the SCX25-A is housed within a brass microphone body which is merely 4 inches long. The result is the smallest footprint of any large diaphragm microphone to date, allowing the SCX25-A more convenience and freedom when it comes to mic placement. And because of the internal capsule suspension mounting system, the need for costly
shock mounts is eliminated and set-up time is greatly
simplified.
The SCX25-A operates on phantom power of 48–52 Volts.
Optimum results will be achieved by using the SCX-25 with a high quality mic preamplifier and premium quality microphone cable.
$ 781.00
(save 15% off RRP)
(shipping $19.50)
|
Buy Now!
|
|
Specifications
- Transducer Type Condenser
- Frequency Response 20 Hz -20 kHz
- Polar Pattern Cardioid
- Output Impedance 200 Ohms
- Sensitivity 27 mV (ref 1k @1 Pascal)
- Equivalent Noise Level 14 dB (A weighted) Signal to Noise Ratio 80 dB (ref
1k @1 Pascal)
- Power Requirements 48 -52v phantom
- Maximum SPL 135 dB
- Dynamic Range 121 dB
- Cable/Connector 3 pin gold plated male XLR connector
- Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector
- Housing Brass
- Weight 6 oz/170 grams
|
|
