Subscribe to our
free monthly Newsletter
   Shop by Brand > Beyerdynamic
Beyerdynamic MC 930 - Cardioid Condenser Mic for Choirs and Overheads
Click to view enlarged images

Beyerdynamic MC 930 - Cardioid Condenser Mic for Choirs and Overheads

The MC 930 condenser microphone provides an enormous versatility due to its neutral sound and accurate design. The features of the MC 930 include the wide frequency response of 40 - 20,000 Hz and a signal-to-noise ratio of 71 dB. The MC 930 is suitable for miking choirs, orchestras and solo instruments. Due to the switchable pre-attenuation of 15 dB it provides excellent performance at high sound pressure levels. The switchable low-cut filter with 6 dB/Octave at 250 Hz compensates for proximity effects. With the WS 101 wind shield the MC 930 can be used for vocal applications.

The MC 930 is phantom powered (11 - 52 V) and therefore suitable for live and studio applications. Due to its cardioid polar pattern, the MC 930 has a high gain-before- feedback and eliminates noise from the rear. It is not only a first-class tool for studios, but also for PA systems, where excellent sound and maximum gain-before feedback are required. Exceptional XY stereo recordings may be achieved by using two MC 930 microphones.

   $ 899.00
   (save 1% off RRP)    (shipping $12.50)
Buy Now!   

Specifications

    Applications
  • Studio
  • Home recording
  • Live applications
  • Vocals
  • Choirs
  • Overhead
  • Instruments

    Features
  • Cardioid polar pattern
  • Switchable pre-attenuation -15 dB
  • Switchable bass roll-off filter at 250 Hz
  • Phantom power 11 - 52 V

    Technical Specifications
  • Transducer type: True condenser
  • Operating principle: Pressure gradient
  • Polar pattern: Cardioid
  • Frequency response: 40 - 20,000 Hz
  • Open circuit voltage at 1 kHz (0dB = 1V/Pa): 30 mV/Pa
  • Nominal impedance: 180 Ω
  • Load impedance: 1000 Ω
  • Max. SPL at 1 kHz: 125 dB, with pre-attenuation 140 dB
  • S/N ratio rel. to 1 Pa: 71 dB
  • A-weighted equivalent SPL: 16 dB
  • Power supply: 11 - 52 V phantom power
  • Current consumption: 4.6 mA
  • Connector: 3-pin XLR male
  • Length: 128 mm
  • Shaft diameter: 21 mm
  • Weight without cable: 115 g
Note: All prices are inclusive of GST
Home | About Us | Delivery | Terms & Conditions | Contact Us | Affiliates | Site Map