|
Beyerdynamic TG V96c - Premium True Condenser Mic (cardioid) for vocals
Every comparison needs a reference – data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96c true condenser microphone – the benchmark for live vocals assumes this role.
The strength of the TG V96c lies in its absolutely faithful reproduction - even of the finest nuances and on stage every detail counts. The microphone’s exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what’s inside that makes the TG V96c into a topclass microphone and makes it stand out with vocalists, professional rental companies and sound technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and nobtrusive sound pattern.
Further advantages: the TG V96c can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation.
The TG V96c is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.
$ 889.00
(save 13% off RRP)
(Free Shipping)
|
Buy Now!
|
|
Specifications Features- High-quality vocal microphone
- Frequency-independent cardioid polar pattern
- Compensated proximity effect
- Wire mesh basket without foam
- Shock mounted microphone transducer and electronics
Technical Specifications- Price category: Professional
- Transducer type: True condenser
- Operating principle: Pressure gradient
- Polar pattern microphone: Cardioid
- Frequency response:
Close miking: 20 – 20,000 Hz
Distant miking (measured at 1 m): 55 – 20,000 Hz
- Open circuit voltage: 4 mV/Pa (-48 dBV) ±2 dB
- Nominal impedance: 60 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL at 1 kHz: 150 dB
- Signal-to-noise ratio: 64 dB [CCIR, Q-Peak]
- Equivalent SPL: 20 dB [A, RMS]
- In-phase rejection 50 – 20,000 Hz: ≥ 60 dB
- Power supply: Phantom power: 24 – 48 V (recommended: 48 V)
- Current consumption: 4.3 mA
- Connection: 3-pin male XLR,
1 = ground
2 = +
3 = -
- Dimensions:
Length: 185 mm
Shaft diameter: 26 mm
Head diameter: 48 mm
- Weight: 330 g
- Net weight without packaging: 360 g
|
|
