|
Furman M-10xE Power Conditioner with 10 IECs - No Lights
You've got a rack for your effects, preamps, tuner... You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on.
You're recording and can't track down where that noise is coming from? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it's enough to power your whole home studio.
Specifications - Surge/Spike Protection
- AC Noise Filtration
- x10 filtered & protected rear IEC outlets (plus x1 front convenience outlet)
- Robust steel chassis
- "Protection OK" light indicator
- The M-10Lx E adds pull-out light tubes, with dimmer knob, for discreet rack illumination.
- Maximum Output Current: 10 amps
- Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male
- Operating Voltage: 230VAC 50Hz
- Spike Protection Mode: Line to neutral
- Energy Dissipation: 305 joules
- Peak Impulse Current: 12,000 amps
- Maximum Continuous Opterating Voltage: 650 Volts
- Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
- Dimensions: 1.75” H x 19” W x 7.5” D
- Weight:2.3 kg.
- Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
|
|
