|
Markbass LMK Bass Head - 2 Channel Preamp 300W
This head is a true 2-channel preamp, built for versatility. The LMK can be used with 2 basses (using separate EQ and level control for each instrument) or can be switched between the 2 channels to use two different sounds with one bass. The LMK's incredibly natural sound is also very flattering to acoustic basses. The new generation of Markbass amplifiers is truly innovative, and represents a new stage in the evolution of bass amplification. Their custom-designed digital power supply circuitry allows for impeccable bass frequency reproduction, and the incredible-sounding digital power amps (used in the SD800 head) take advantage of cutting-edge technology. All of Markbass' new heads give you a wide variety of sounds and unsurpassed tone in an extremely lightweight package.
$ 1727.00
(save 20% off RRP)
(shipping $20.00)
|
Buy Now!
|
|
Specifications INPUTS - INPUT A (master) impedance 500 Kohm, max. voltage 15 Vpp
- INPUT B impedance 500 Kohm, max. voltage 15 Vpp
- EFFECT RETURN impedance 22 Kohm, max. voltage 10 Vpp
CONTROLS - GAIN CH1 –80 dB to +23 dB range
- GAIN CH2 –80 dB to +26 dB range
- LINE OUT level control on front panel
- GROUND LIFT switch on rear panel
EQUALIZATION
- CH2:
- LOW center frequency: 60 Hz; level: ±16 dB
- LOW MID center frequency: 360 Hz, level: ±16 dB
- HIGH MID center frequency: 800 Hz, level: ±16 dB
- HIGH center frequency: 5 kHz; level ±16 dB
- VPF (Variable Pre-shape Filter) center frequency: 380 Hz (cut)
- VLE (Vintage Loudspeaker Emulator) frequency range cut: 250 Hz – 20 kHz
CH2: - LOW center frequency: 60 Hz; level ±16 dB
- LOW-MID center frequency: 360 Hz, level ±16 dB
- HIGH-MID center frequency: 800 Hz, level ±16 dB
- HIGH center frequency: 5 kHz; level ±16 dB
- VPF (Variable Pre-shape Filter) center frequency: 380 Hz (cut)
OUTPUTS - LINE OUT balanced XLR, max. voltage 10 Vpp
- EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT unbalanced, max. voltage 25 Vpp
- SPEAKER OUT speakon, 1/4"
OTHER - HEIGHT 2 standard rack units
- WEIGHT 6.39 lbs / 2.9 kg
- FOOTSWITCH CH1, CH2, CH1+CH2, mute
- OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm
- POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz
All models are equipped with Markbass-designed digital power supply circuitry.
Minimum ohm load for all Markbass heads is 4 ohms. |
|
