|
Neumann TLM-193 Large Diaphragm All-Purpose Cardioid Condenser
The TLM 193 is a large diaphragm microphone with a cardioid polar pattern. With this microphone Neumann continues its long tradition, and is offering high end technology at an affordable price for musicians and the home recording studio. The microphone uses a transformerless circuit, featuring extremely low self noise and large dynamic range. The polar response is very linear over a wide incidence angle. Thus, even signals coming from the side are reproduced faithfully and without coloration. The exposed surface of the microphone capsule is at ground potential, making it immune to typical interference and contamination.
The TLM 193 differs from omnidirectional pressure transducers, where, due to physical reasons, the diffuse-field and free-field responses never agree. This microphone has a very even diffuse-field response for all polar patterns. This is important in a reverberant environment, as more reflections arrive at the microphone from different directions. The acoustic information is not affected in its tonal quality when recorded by the microphone. This characteristic is achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response reproducing all transient phenomena of music and speech without coloration. The microphone is supplied with an SG1 swivel mount and wooden box and is available in a black matte finish.
$ 1559.00
(save 22% off RRP)
(shipping $20.00)
|
Buy Now!
|
|
Specifications Recommended Applications
- A universal cardioid mic
- Ideal for close miking of instruments with high sound pressure levels
- Announcer's mic for broadcasting/dubbing
- Home recording and project studios
- Vocalist recording
- Spot mic for wind instruments, strings, percussion, guitar amps
Technical Data
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Cardioid
- Frequency range: 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohms: 18 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR1): 21 dB
- Equivalent noise level, A-weighted1): 10 dB-A
- Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 73 dB
- Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 84 dB
- Maximum SPL for THD 0.5%2): 140 dB
- Maximum output voltage: 13 dBu
- Dynamic range of the microphone amplifier (A-weighted): 130 dB
- Supply voltage (P48, IEC 61938): 48 V ± 4 V
- Current consumption (P48, IEC 61938): 3 mA
- Matching connectors: XLR3F
- Weight: 480 g
- Diameter: 49 mm
- Length: 175 mm
|
|
