PurePower 2000i Power Regeneration System
We believe that the sounds and images that come from your system should be the ones that were introduced intentionally – not those that arrived unintentionally from your utility or through your house wiring.
We believe the music shouldn’t suddenly stop or the screen flicker and dim or a recording operation fail when the utility power has a momentary sag or a short outage.
We believe that power problems such as surges, spikes, transients, and harmonic distortion shouldn’t damage and destroy expensive components catastrophically, or slowly by chronic overheating.
Pure Power In > Pure Sound Out
The PurePower™ APS provides truly regenerated pure power regardless of what problems exist in your utility supply. This is accomplished through our double conversion technology. We convert the incoming power to produce a clean DC current, then recreate a 50hz 230 volt AC wave form from the DC. No spikes, sags, surges or other power disturbances can be passed through from input to output.
Accurate voltage specs prevent current reduction.
Some products designed to clean or filter the power can reduce the current to your amplifier. The PurePower™ APS maintains a 230 volt output +/- 3% with up to 92% energy efficiency and a power factor of more than .95. All of our APS models can deliver their full rated wattage even during short or long duration power sags. In fact, they deliver continuous full power even if you’re getting extended periods of as low as 180 volts at the wall outlet.
If you have spent time, money and effort to assemble a superior set of components that are capable of delivering a high level of audio and video performance, make sure they are given a source of clean, pure, continuous electrical power to ensure they have a chance to perform to their utmost.
available in black and silver. (please specify at time of purchase)
| Call or e-mail us for the best available price
1300 785 205 or (08) 8339 1000
PurePower 2000i, 230 volts
• 8.7 Amps RMS, 13 Amps Short Duration, 26 Amps
• 1400 Watts Continuous, 2000 Watts Short Duration,
4200 Watts Peak
• 7 Schuko or Country Specific Receptacles or 10
Hubbell Nema 5-15R.
• 15 Minutes 1/2 Load Battery Operation
• Surge Protection For: RJ45 (Network), RJ11 (Tel.)
and F-type Coax (2)
Mounting Shelf, vertical or rack mounting, handles incl.
Dimensions (HxWxD) 130 x 432 x 570 mm
Environmental and Safety
Safety Markings CE
EMC monitors CE EMC, C-TICK standards
Surge Supression IEEE / ANSI C62.41 Category B (formerly 587)
Ambient Operating Temp. 32 – 90 F (0 – 32 C)
Audible noise <14 dBA
Relative humidity 0 to 90% non-condensing
Automatic Bypass Automatic bypass on overload to allow high
power amplifier start-up inrush
Diagnostics Full system self-test on power up
Additional Power Packs PP72V*
Dimensions (HxWxD) 89 x 432 x 508 mm
Weight 29.5 kg
• See details on www.purepoweraps.com under PowerPacks
From APS to battery operation: Zero transfer time
From APS to bypass: Zero transfer time
TAKE YOU FREE PUREPOWER AUDIT HERE