|
QSC Audio RMX 5050
The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value for money. The RMX 5050 provides advanced thermal management systems to deliver higher continuous power in 2-ohms stereo or 4-ohms bridged applications.
The device has dual mono, high current power supplies for increased reliability and performance. High-current toroidal transformers deliver greater two-ohm power and low noise. For a 5kW amplifier it is remarkable compact, fitting in a 3RU chassis only 16" deep.
Professional quality performance—incorporates road-proven QSC designs for reliability. Independent user-defeatable clip limiters reduce distortion. Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom. Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs provide maximum flexibility. Front mounted gain controls for easy access and Signal and Clip LED indicators allow you to monitor performance.
| Coming soon!
e-mail sales for details.
|
Specifications
- Stereo, Both Channels Driven
- 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts
- 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts
- 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts
- 8 ohms EIA 1 kHz 0.1% THD 1100 Watts
- 4 ohms EIA 1 kHz 0.1% THD 1800 Watts
- 2 ohms EIA 1 kHz 1% THD 2500 Watts
- Bridged Mono
- 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts
- 8 ohms EIA 1 kHz 0.1% THD 3600 Watts
- 4 ohms EIA 1 kHz 1% THD 5000 Watts
- Distortion (SMPTE-IM): Less than 0.02%
- Distortion (Typ) 20 Hz-20 kHz, 10 dB below rated
power: Less than 0.02%
- Distortion (Typ) <1 kHz, full rated power: Less than
0.02%
- Frequency Response: 20 Hz to 20 kHz, 8 ohms, LF
filter bypassed, +0/-1 dB; 5 Hz to 50 kHz, 8 ohms, LF filter bypassed,
+0/-3 dB
- Damping Factor: >250 @ 8 ohm
- Noise (unweighted): 100 dB below rated output (20 Hz to 20
kHz, 8 ohm load)
- Input Sensitivity: 1.42 Vrms for 1050 watts into 8 ohms
- Controls Front: AC power switch, Ch. 1 and Ch. 2
gain control
- Controls Rear: 10-pole DIP switch featuring LF filter
on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each
channel and switches for selecting Stereo, Parallel, or Bridge mode.
Push-button circuit breaker for each channel.
- Voltage Gain: 64x (36 dB) for 8 ohm load
- Input Impedance: 20 k ohm balanced, 10 k ohm unbalanced
- Indicators: Power On - Green LED, Protect
- Red LED, Signal -30dB - Yellow LED, Clip - Red LED
- Connectors Input: XLR female, TRS (1/4-inch), and
barrier-strip screw terminals, each channel
- Connectors Output: Binding posts and Speakon
outputs (Ch. 1 Speakon wired for biamp)
- Cooling: Continuously variable-speed fan, rear-to-front air
flow
- Amplifier Protection: Short circuit, open circuit,
thermal, ultrasonic, and RF protection. Stable into reactive or
mismatched loads
- Load Protection: On/off muting, DC fault output crowbar
- Power Requirements: 100, 120 or 240 Volts AC
(±10%) 50-60 Hz (factory configured)120V models require 20
Amp, 120V service and are supplied with a NEMA 5-20 plug on the
cordset.
- Dimensions: 19" 19.0" (48.3 cm) wide, 5.25" (13.3 cm) tall,
15.9" (40.39 cm) overall depth
- Weight: 75 lb (34.02 kg) net, 87 lb (39.46 kg)
shipping
|
|
