|
Radial Tonebone Classic Tube Distortion Pedal
The Tonebone Classic is a 12AX7 tube equipped true-bypass distortion that has been optimized for flexibility and tonal range.
Following the vision set by Leo Fender in the 1950’s, the Classic is based on vintage overdrive sounds that started in the ླྀs and ྂs and today remain some of the most sought after tones. With three drive settings, variable drive control and powerful EQ, the Classic lets you dial in the slight overdrive to high-gain saturation and everything in between.
And like a real tube amp, when you turn your guitar volume down, the Classic cleans up naturally - without the noise, hum or buzz that is common with most other pedals. At higher settings, every note remains distinct. The Classic is so responsive and dynamic your playing style shines through!
The Radial Tonebone Classic – the most dynamic and responsive distortion pedal ever!
$ 269.00
(save 18% off RRP)
(shipping $12.00)
|
Buy Now!
|
|
Specifications - Circuit type: Hybrid tube / proprietary circuit
- Tube type: 12AX7 vacuum tube
- Input impedance: 1meg Ohm at input jack
- Output impedence: 10K Ohm
- Drive gain 3-way switch: Used in conjunction with the drive gain
control.Drive switch selects the gain range of the overdrive circuit.
- Low: Normal mode (+0dB Nominal)
- Med: Medium distortion (+9dB)
- High: High distortion (+20dB)
- Drive control: Used in conjunction with the drive gain switch, drive
is used to adjust the overall amount of gain to the overdrive circuit.
- MID BOOST 3-way switch: Used to fatten up the sound for more cut
and sustain during solos. Also, will fatten up the sound of single coil pickups.
- High: +12dB @ 620Hz
- Medium: +6dB @ 390Hz
- Bypass: No boost
- FILTER control: Balances the ratio of high frequencies between amplifier
and Classic distortion to compensate for overly bright amplifiers.
- TOP END 3-way switch: Switch sets the overall tonal character of
the Classic to best match the amp and settings. Brighter amps are normally
compensated with darker settings.
- Bright: Boosts +6dB @ 10kHz
- Flat: No boost
- Dark: Cuts -6dB @ 1.8kHz
- HIGH & LOW EQ controls: Unity gain to +15dB Low: High: +/- 14.5 db
@ 100Hz +/- 10 db @ 4.3kHz
- LEVEL control: Used to balance the output level between the input
drive without altering any of the tonal characteristics. Works like the master
volume on an amplifier.
- Footswitch: True bypass with green on/off status LED Heavy-duty high-cycle
switch
- LED indicator: Large 3mm OD ultra-bright status LED
- Switching: Opto-coupler assisted, 5msec Rise time
- Construction: 14 gauge steel, baked enamel finish
- Size: 7"w x 4 1/4"d x 2"h (174 x 108 x 51mm)
- Weight: 2.15lb (1kg)
|
|
