|
Studio Projects SP828 - 8-Channel 2-Bus Microphone Preamp
The Studio Projects 828 is an 8 Channel mic preamp incorporating the latest revision of Burr Brown IC's. The SP828 is also an 8X2 mixer that allows a real time mix of all 8 inputs two a stereo out buss. The SP828 has individual outputs on each channel via balanced 1/4" jacks for direct feeds to any recording medium. Both line level inputs on 1/4" balanced jacks, and XLR balanced mic inputs are on the rear panel. When nothing is plugged into the line input of any channel, the mic/line switch of that channel defaults to a 20dB pad switch.
The output section has a stereo L/R output control and a headphone input with control for real time monitoring. In addition, there are L/R LED meters and a Solo LED for monitoring. The master section output has L/R outputs on 1/4" balanced jacks, and inserts for the L/R buss. There is a summed mono 1/4" output jack for an external feed. Each unit has an expansion in/out jack to allow for cascading several units together to get up to 32 inputs where all 32 inputs buss to the L/R mix out, while offering 32 direct outputs for remote recording. The new SP828 incorporates an external power supply for clean operation.
$ 960.00
(save 14% off RRP)
(shipping $14.00)
|
Buy Now!
|
|
Specifications Features
- 48V phantom power with LED
- Phase Reverse with LED
- Mic/Line Switch with LED - Defaults to 20dB Pad
- Peak and Signal Present Indicators
- Gain Control
- Level & Pan
- Solo Switch with LED
Technical Data
- Frequency Response: 20Hz - 20kHz . +0/-0.5dB (Ref 1kHz)
- THD+Noise: <0.002% THD 20Hz to 20kHz at -20dBu In, +15dBu out (35dB gain)
- Phase Shift: <+/-10 degrees 20Hz to 20kHz
- Gain Range: 10dB to 65dB
- Pad: -25dB
- Polarity: Reverse (-180 degrees)
- XLR Input: 2k5 ohms Balanced, Pin 2 hot
- EIN: <-127dBu (@150 ohm, 60dB gain)
- Max Voltage Gain: XLR-In To Chan Balanced Out= 65dB
- TRS Line Input: 15k ohms Balanced; Max Voltage Gain: TRS-In To Chan Balanced Out= 40dB
- Channel Output: Gnd-Compensated/Impedance Bal TRS . Max Out= +21dBu
- Mix Gain: Channel to L or R Output: +10dB
- Mix Insert Points: TRS Jack . Tip= Send, Ring= Return Mix Insert Levels= -2dBu
- Power Requirements: 18VAC, 750mA
- Power requirement: 48 +/- 4V
- Size: 17.2" x 5.8" x 1.75" (1U)
|
|